Equipment that uses physical or chemical methods to increase the value of a raw material or product is referred to as processing equipment. Alaqua offers processing equipment such as crystallizers, spray dryers, and other products. A large number of customers have undoubtedly stated that we provide the most reliable processing equipment services. We work with a variety of industries, including environmental, food, dairy, and beverage. We’ve explained our equipment and services below. Hope you find this helpful!
Processing Equipment Types:
An evaporator is a device that converts liquids to a gaseous state. A downstream processing system employs several stages to isolate and purify the desired product. Pretreatment, solid-liquid separation, and concentration are all part of the overall process structure. Evaporation is a downstream processing stage that is widely used to concentrate foods, chemicals, and salvage solvents. The goal is to vaporize the majority of the water in a solution containing the desired product.
Solvent Recovery Systems:-
These machines use the distillation process to separate volatile and nonvolatile solutions in a solvent. In like manner, how a vapor degreaser works, the solution is boiled, and the vapors are condensed back into liquid in a separate tank. Each constituent of the solvent and contaminants boils at a different temperature, with oils and soils typically boiling much higher than solvents. Reduced effects on hazardous waste generator permit status, virgin solvent purchases, and solvent chemical waste are a few of the advantages.
This machine concentrates feed into solid crystals and clean water. Crystallization is a solid-liquid separation technique that involves the formation of solid crystals from a liquid solution. They can remove liquid wastes, resulting in zero liquid discharge. As a matter of fact, they are used alone or in conjunction with other technologies. Crystallizers can recover salts from wastewater, which can then be used or sold. A crystallizer maximizes waste stream usage while also assisting plants in meeting zero liquid discharge (ZLD) requirements.
A heat exchanger is a device designed to transfer heat from one medium to another. They are commonly used in space heating, refrigeration as well as power plants. For example, a radiator in a car is a heat exchanger, in which a hot engine-cooling fluid, such as antifreeze, transfers heat to air flowing through the radiator.
Distillation is a method of separating chemical substances in a boiling liquid mixture based on differences in their volatilities. As it is usually part of a larger chemical process, it is referred to as a unit operation. As a matter of fact, distillation has a variety of commercial applications. It is used to separate crude oil into different fractions for different applications. Distilled water is used to remove impurities such as salt from seawater. For industrial use, the air is distilled to separate its constituents, most notably oxygen, nitrogen, and argon. Since time immemorial, a distillation of fermented solutions is used to produce distilled beverages with higher alcohol content.
A spray dryer, as the name implies, is a drying device that uses a spray. It evaporates a heated gas and a sprayed liquid stream in a drying chamber. As a result, it produces a free-flowing dry powder with a controlled average particle size. A spray drying unit operation includes atomizing a solution or slurry, a source of hot air such as a waste flue gas, and so on.
Processing Equipment Services:
Installation and Commission:-
For the structural steel, beams are epoxy painted or hot-dip galvanized. The framework is welded or bolted. Alaqua designs the structure to withstand the weights of the equipment and forces expected during operation and flooding. Subsystems within battery limits, such as piping, heaters, field instrumentation, etc. are securely mounted. The structural components’ connections are welded. In this case, the customer submits the geological data to its Structural Engineering Subcontractor.
Training of Personnel:-
Alaqua provides assistance during the commissioning and startup of the equipment for a per diem fee. We train the Customer’s designated personnel in proper operating and maintenance procedures. The duration of the supplier’s on-site representation for startup and testing is determined in collaboration with the client. The Customer may also send key personnel to our fabrication facility to allow studying the inner workings of the evaporator and the design of each individual subsystem. This is done at no cost, but the customer is responsible for the personnel’s transportation and living expenses. We also provide troubleshooting services. We supply worldwide to meet your processing needs and have repeatedly proven to be the best processing equipment supplier.